KTM Duke 390 2017 Carbon Screen
All new version 3 Now available
One of the issue with the new 2017 is the poor availability of screens for it. Along with those that are available being both expensive and ugly. I set upon trying to find an good alternative.
What I came across was a Carbon Fiber screen for the older 2011-16 models. It fits in around the display on these versions. I took a punt on this hoping that I could make some kind of bracket to make it work. I got this screen from Zero Limits they were great during the buying process and sent me lots of info.
Parts List
2 x Screen brackets (left & right)
2 x TFT brackets (Left and Right)
2 x Plastic TFT bracket spacers
4 x M6 Bolts 10MM
2 x M6 x 20mm bolts
2 x M5 x 25mm bolts
2 x M5 Washers
Fitment
These brackets are designed to allow the fitment of screens from the previous versions of the KTM Duke 125 and 390 from before 2017. It has been tested with the Zero Limits carbon fibre version, but others that match the stock part should also fit. Here are some links to various different screen choices.
I will be making and selling these brackets for anyone who would like one. Please contact me for more info.
Manual
A full installation manual is available to download here
The carbon screen arrived quickly.
A quick test fit to make sure it is going to work.
Next I spent a lot of time 3D modelling and print off multiple brackets for testing. Believe it or not this is only around 50% of them in this picture.
The final bracket is a 6 piece design and deals with all the angles etc.
Doesn’t look half bad just the bracket.
The final screen in place.
From the riders seat.
Comments are closed.