Skip to content

3 February 2016

Nerf Stryfe Worker Flywheels and Wall hanging

So I had a bit of a wait for more parts to arrive.  The main ones were the rhino motors and worker flywheels.  Once they were here I could take the Stryfe apart again and this time wire it properly.  The silicon wire was so much easier to run round the blaster.

IMG_8390

I got the rhino motors wired in and the worker flywheels fitted.

IMG_8392

After that I needed to find a way of wall mounting this blaster for storage in my office.  I looked around at lots of hooks and off the shelf items, but none were suitable.  In the end I decided to make my own.  Five minutes with a bending brake and saw and I had these:

IMG_8384

I laid foam on the inside of them and fitted to the wall via screws.  The blaster looks awesome up on my wall.

IMG_8381

IMG_8380

Once I’d completed this blaster I set to work on my kids one making some changes/improvements.  I ended up with this result that they are delighted with.

IMG_8415

I’ve got one more part arriving for my Stryfe that will see it completed.  Next up I want to finish my Demolisher internal mods before starting on some Nerf painting projects.

 

Read more from Modding, Nerf

Comments are closed.